hebbar77
03-12 08:08 PM
I had same problem. I was told to re -apply after i called in feb (after 30 days of approval).
Next day I called again, and used s**t word on them. Then they told me that they might not have sent it. Meanwhile I also got status change of case transfer. Few days ago status changed to document sent. I am waiting for the document. Hopefull I get it. At any cost I will not spend a penny on immigration anymore let alone re-applying for AP. I rather party or do charity with that money!
Next day I called again, and used s**t word on them. Then they told me that they might not have sent it. Meanwhile I also got status change of case transfer. Few days ago status changed to document sent. I am waiting for the document. Hopefull I get it. At any cost I will not spend a penny on immigration anymore let alone re-applying for AP. I rather party or do charity with that money!
wallpaper short chop hairstyle. Thin
indianabacklog
06-27 08:56 AM
If an A# has been assigned it will be in the beneficiary box of the I140 approval notice. Not everyone has been given one it would appear. If you have not leave that box on the forms blank.
thomachan72
05-12 09:53 AM
Dear All,
Could you please advise, if we can port eb3 to eb2.
My husband is working for the same employer for last 6 years. He has masters degree from US and he filed for his GC in 2004. In 2004, he had only 1 year experience. The lawyer said he does not qualify for Eb2 despite his US degree.
Now after 6 years, he had a job change within his company. He became a principal engineer from just an engineer. Could we port to EB2?
If yes, what should we be careful about and how should we go about it?
Sincerely,
Augustus
In principle the main criteria would be whether the job requires a person with a masters or higher degree. If the company can prove that the job description and requirements match that for a person with masters then he would qualify. Again this is based on my awareness from reading various posts on the IV and similar websites. The attorney would be the best to decide. I know many of our friends in the IV have masters but the main problem they are facing is that the job description does not specify a masters. So the employer hesitates to reaply in EB2 catagory. If your husband fits in then I believe all he has to do is to file another 140 and port the PD of the EB3 application.
How frustating this can be, right? :(
Could you please advise, if we can port eb3 to eb2.
My husband is working for the same employer for last 6 years. He has masters degree from US and he filed for his GC in 2004. In 2004, he had only 1 year experience. The lawyer said he does not qualify for Eb2 despite his US degree.
Now after 6 years, he had a job change within his company. He became a principal engineer from just an engineer. Could we port to EB2?
If yes, what should we be careful about and how should we go about it?
Sincerely,
Augustus
In principle the main criteria would be whether the job requires a person with a masters or higher degree. If the company can prove that the job description and requirements match that for a person with masters then he would qualify. Again this is based on my awareness from reading various posts on the IV and similar websites. The attorney would be the best to decide. I know many of our friends in the IV have masters but the main problem they are facing is that the job description does not specify a masters. So the employer hesitates to reaply in EB2 catagory. If your husband fits in then I believe all he has to do is to file another 140 and port the PD of the EB3 application.
How frustating this can be, right? :(
2011 short hairstyles for fine hair
MatsP
November 9th, 2004, 09:41 AM
Sorry to hear about your problem with the D70...
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
more...
tish
06-25 06:01 PM
Consult a lawyer.
I personally think putting your canadian vist as the last place of entry might not show up in records as no stamping took place and also the I94 part which is taken by the customs and sent to INS in kentucky did not happen in your case. So when USCIS checks u'r I94, all they will see is the date in 2000 when you came to US.
In your case since you jumped from F1 to H1B via OPT you might not have had any gaps in chaging status and USCIS did not ask you to leave the country for gettting the H1B stamped(Change of status was approved )
This situation of yours hinges on technicality and better talk to a lawyer.
what happens if the passport gets stamped and got a new I94 in the vancouver airport and no inspection after coming back to US.
what should we enter as last entry into us
I personally think putting your canadian vist as the last place of entry might not show up in records as no stamping took place and also the I94 part which is taken by the customs and sent to INS in kentucky did not happen in your case. So when USCIS checks u'r I94, all they will see is the date in 2000 when you came to US.
In your case since you jumped from F1 to H1B via OPT you might not have had any gaps in chaging status and USCIS did not ask you to leave the country for gettting the H1B stamped(Change of status was approved )
This situation of yours hinges on technicality and better talk to a lawyer.
what happens if the passport gets stamped and got a new I94 in the vancouver airport and no inspection after coming back to US.
what should we enter as last entry into us
like_watching_paint_dry
01-13 08:33 PM
Hi: I need some help in resolving my situation. I im in the seventh year of my H1B. My I-140 got approved on April 2006 with a priority date of November 2001 date Under India EB3 Category. Since the priority dates are not current, I coulnd't file for I-485. Now, my client where I am working is offering me permanent employment on H1b and I want to know what are the options available for me without losing my previous GC status and priority dates.
1. Can I take the new employment without losing the priority dates.
2. If I lose the priority dates, can I take the employment and start the GC process again??
Your help is really appreicated to come out of the situation
You have waited very long and I think you deserve to get the green card. But under EB3 India, that wont happen for another 4-6 years to be conservative. If you were qualified for EB2 as of Nov 2001 (you held a MS or had BS + 5 yrs as of Nov 2001, you should not have any problem with retaining the old priority date while filing under EB2). Ask your client to file Perm LC under EB2 & do the I140 using the Nov 2001 PD. Then join them.If you don't qualify, do in EB3. Dont join the client if they are not stable.. better to wait with your current employer under EB3 than go EB3 with an unstable employer and risk losing it all in the worst case scenario. If they really want you that badly, they will do this under premium processing and you could be in your current state with them in a matter of a couple of months.
1. Can I take the new employment without losing the priority dates.
2. If I lose the priority dates, can I take the employment and start the GC process again??
Your help is really appreicated to come out of the situation
You have waited very long and I think you deserve to get the green card. But under EB3 India, that wont happen for another 4-6 years to be conservative. If you were qualified for EB2 as of Nov 2001 (you held a MS or had BS + 5 yrs as of Nov 2001, you should not have any problem with retaining the old priority date while filing under EB2). Ask your client to file Perm LC under EB2 & do the I140 using the Nov 2001 PD. Then join them.If you don't qualify, do in EB3. Dont join the client if they are not stable.. better to wait with your current employer under EB3 than go EB3 with an unstable employer and risk losing it all in the worst case scenario. If they really want you that badly, they will do this under premium processing and you could be in your current state with them in a matter of a couple of months.
more...
pointlesswait
08-01 03:17 PM
just send one thank you card and some flowers..to the senator on behalf of IV!
signed by 20000 forum members....
i dont think calling and thanking him is a good idea!
signed by 20000 forum members....
i dont think calling and thanking him is a good idea!
2010 hairstyles for thin short
gapala
07-10 03:15 PM
Hi Dhundhun,
Thanks for your response.
to your question:
.. It should be OK to take job with Y (assuming that you have I-797 from Y with I-94) and then getting Visa stamped when new passport arrives.
VenuK: I wish its that simple... On I-797 from Y it doesn't have I-94 number on it anywhere. since its through consular processing.
In order to work with Y, i have to get stamped first then only pay stubbs are generated. This was the understanding, when owner of Y ,company Y Attorney and myself were in the conference call discussion.
advices are always appreciated
Pls let me know...
With Thanks,
Venu
What is the result of appeal?
Based on the information provided on above post , I believe X is paying you in view of pending appeal.
Note that there is a risk in going to other countries for stamping due to PIMS related delay. You can search for thread from people who were stuck in Canada for few months but they were Canada landers and stay in canada wasn't an issue for them.
Its safe to go to your home country and get it stamped there. You are atleast safe to stay as long as PIMS takes to validate.
Thanks for your response.
to your question:
.. It should be OK to take job with Y (assuming that you have I-797 from Y with I-94) and then getting Visa stamped when new passport arrives.
VenuK: I wish its that simple... On I-797 from Y it doesn't have I-94 number on it anywhere. since its through consular processing.
In order to work with Y, i have to get stamped first then only pay stubbs are generated. This was the understanding, when owner of Y ,company Y Attorney and myself were in the conference call discussion.
advices are always appreciated
Pls let me know...
With Thanks,
Venu
What is the result of appeal?
Based on the information provided on above post , I believe X is paying you in view of pending appeal.
Note that there is a risk in going to other countries for stamping due to PIMS related delay. You can search for thread from people who were stuck in Canada for few months but they were Canada landers and stay in canada wasn't an issue for them.
Its safe to go to your home country and get it stamped there. You are atleast safe to stay as long as PIMS takes to validate.
more...
Almond
07-17 08:07 AM
This is a terrible situation, I feel so bad for you. Can you afford to go to a lawyer as soon as you can and ask for advice? I think it's very important, this is critical. 11 years:(
hair short haircuts for fine hair3
reverendflash
10-21 01:59 AM
there are a ton of sites out there for just that... how to improve your snapshots...
You didn't learn how to walk in a day, photography is the same, trial and experiment. With digital cameras, it is so cheap. I can't wait to take pix next week in Yosemite (camping w/my girlfriend)...
:P :P
Rev:elderly:
You didn't learn how to walk in a day, photography is the same, trial and experiment. With digital cameras, it is so cheap. I can't wait to take pix next week in Yosemite (camping w/my girlfriend)...
:P :P
Rev:elderly:
more...
smuggymba
05-19 01:47 PM
In india we celebrate the bharat pravasi diwas (NRI Day) and PM is in attendance. Remittance to India is a big boost to the economy.
PM should give a hint to Obama on EB issues but I don't expect PM to help me get my GC. Bharat Pravasi diwas is a good way to initiate this dialogue within the NRI community.
PM should give a hint to Obama on EB issues but I don't expect PM to help me get my GC. Bharat Pravasi diwas is a good way to initiate this dialogue within the NRI community.
hot short hair styles for women
sku
09-14 11:39 AM
Bump
more...
house short hairstyles fine hair.
eb3retro
08-30 12:38 PM
My PD is 2002 Aug
hi redhat..
welcome to IV. looks like you joined IV recently. I hope you will get answers for your questions here and will come out of this RFE mess. Please do consider abt giving IV (and yourself) a hand in the Washington Rally. All the best.
hi redhat..
welcome to IV. looks like you joined IV recently. I hope you will get answers for your questions here and will come out of this RFE mess. Please do consider abt giving IV (and yourself) a hand in the Washington Rally. All the best.
tattoo pictures of short hair styles
morchu
04-27 03:08 PM
Yes. Show Company-A unexpired H1-visa-stamp and Company-C H1-I797-Approval Notice at port of entry.
Can i use the same Visa for reentry to US when i am coming back on May/June.
Thanks
Can i use the same Visa for reentry to US when i am coming back on May/June.
Thanks
more...
pictures short hair styles for fine
gc28262
04-19 09:59 PM
I had the same issue. Still awaiting my AP which was applied in Nov 2008.
When I called up TSC where my application was filed, they kept insisting that they have really mailed it and they cannot issue it again unless they receive the AP saying it is undelivered.
I am sure my address is correct as per their records. I got my EAD delivered at the same address without any issue.
Finally I called them again, this time I talked to a more knowledgeable accommodating IO.
Keep calling the service center till you get an instruction similar to the following.
This is the instruction provided
----------------------------------------------------------
Fill out I-131 Application or use the copy of your original application
attach two photos
Mention the receipt no on the top of the form
Also mention REPLACEMENT : no Fees included
Add a covering letter explaining the situation
Post it to the following address
USCIS Texas Service Center
ADDRESS ( This is a special address, This not the standard USCIS address)
On Lower Left corner of the envelope mention:
do Not open in the mail room, No fees are attached
------------------------------------------------------------------
I am still awaiting my AP after doing this. :confused:
After sending the documents as mentioned above ( NO Fee ), I got my AP document on March 6, 2009 via Fedex. ( I never sent any fedex fee :)).
When I called up TSC where my application was filed, they kept insisting that they have really mailed it and they cannot issue it again unless they receive the AP saying it is undelivered.
I am sure my address is correct as per their records. I got my EAD delivered at the same address without any issue.
Finally I called them again, this time I talked to a more knowledgeable accommodating IO.
Keep calling the service center till you get an instruction similar to the following.
This is the instruction provided
----------------------------------------------------------
Fill out I-131 Application or use the copy of your original application
attach two photos
Mention the receipt no on the top of the form
Also mention REPLACEMENT : no Fees included
Add a covering letter explaining the situation
Post it to the following address
USCIS Texas Service Center
ADDRESS ( This is a special address, This not the standard USCIS address)
On Lower Left corner of the envelope mention:
do Not open in the mail room, No fees are attached
------------------------------------------------------------------
I am still awaiting my AP after doing this. :confused:
After sending the documents as mentioned above ( NO Fee ), I got my AP document on March 6, 2009 via Fedex. ( I never sent any fedex fee :)).
dresses short haircuts for men with
vinabath
03-24 03:14 PM
list of some of the threads created by "vinabath" - how many do you see meaningful???
Thread / Thread Starter Last Post Replies Views Forum
No more LC substitution, No more delays in 140. What a relief
vinabath Today 02:55 PM
what would you do if you get GC tomorrow? ( 1 2 3 4 )
vinabath Today 02:37 PM
What does the dots in my profile mean?
vinabath Today 02:00 PM
Tips to get your GC in a YEAR ( 1 2 3 4 )
vinabath Yesterday 03:38 AM
by vinabath 0 445 Retrogression, priority dates and Visa bulletins
Poll: How many will be happy if..... ( 1 2 )
by vinabath 21 1,922 Priority dates transfers and Post 140-approval options
H4-H1 stamping in chennai- Visa renewal??
by vinabath 45 4,405 Retrogression, priority dates and Visa bulletins
BIG JOKE on us by USCIS. Story of the Century.
vinabath 07-02-2007 04:00 PM
by vinabath 14 1,037 Retrogression, priority dates and Visa bulletins
Medical Report Delayed by Six months
vinabath 06-15-2007 01:38 PM
by franklin 8 653 Medical exams and related issues
Y1 Visa - Lets make USA as Dubai
vinabath 05-18-2007 10:44 AM
by vinabath 0 468 Retrogression, priority dates and Visa bulletins
EB2 India - Feb 23 2003. Is it possible this year??
I am exposed now.
Thread / Thread Starter Last Post Replies Views Forum
No more LC substitution, No more delays in 140. What a relief
vinabath Today 02:55 PM
what would you do if you get GC tomorrow? ( 1 2 3 4 )
vinabath Today 02:37 PM
What does the dots in my profile mean?
vinabath Today 02:00 PM
Tips to get your GC in a YEAR ( 1 2 3 4 )
vinabath Yesterday 03:38 AM
by vinabath 0 445 Retrogression, priority dates and Visa bulletins
Poll: How many will be happy if..... ( 1 2 )
by vinabath 21 1,922 Priority dates transfers and Post 140-approval options
H4-H1 stamping in chennai- Visa renewal??
by vinabath 45 4,405 Retrogression, priority dates and Visa bulletins
BIG JOKE on us by USCIS. Story of the Century.
vinabath 07-02-2007 04:00 PM
by vinabath 14 1,037 Retrogression, priority dates and Visa bulletins
Medical Report Delayed by Six months
vinabath 06-15-2007 01:38 PM
by franklin 8 653 Medical exams and related issues
Y1 Visa - Lets make USA as Dubai
vinabath 05-18-2007 10:44 AM
by vinabath 0 468 Retrogression, priority dates and Visa bulletins
EB2 India - Feb 23 2003. Is it possible this year??
I am exposed now.
more...
makeup hairstyles for thin short
natrajs
09-10 05:42 PM
I have 6 IV T- Shirts and I am wearing them already.
When ever I go to distribute the flyers I wear them, it will make others look at you.
Folks Don't wait till last minute, buy them now
When ever I go to distribute the flyers I wear them, it will make others look at you.
Folks Don't wait till last minute, buy them now
girlfriend short haircuts for women with
GKBest
09-28 05:18 PM
The receipt date on my receipt notice days July 2nd not September. The online one says September 7th. I have evedence by document from them that my application was received on July 2nd.
Some have the July 2nd receipt date but other have a later date especially if your case has been transferred from NSC to CSC and then back to NSC.:rolleyes:
Some have the July 2nd receipt date but other have a later date especially if your case has been transferred from NSC to CSC and then back to NSC.:rolleyes:
hairstyles for fine hair, short hair
Rohan99
10-29 01:27 PM
thanks for reply,
One more query..If H4 visa has expired but I have H4 extension till 2009, can I get H4 stamp in India.
My case traveling in Jan to india, My H4 was expired but I have extension. Can I get it stamped as H4. I will be appying for EAD in Nov 07.
Thank you..
Applying for EAD does not invalidate your H4 status. If you travel outside USA without AP and you don't have a valid H4 stamp on your passport, It is considered abandoning your AOS. Hope this helps.
One more query..If H4 visa has expired but I have H4 extension till 2009, can I get H4 stamp in India.
My case traveling in Jan to india, My H4 was expired but I have extension. Can I get it stamped as H4. I will be appying for EAD in Nov 07.
Thank you..
Applying for EAD does not invalidate your H4 status. If you travel outside USA without AP and you don't have a valid H4 stamp on your passport, It is considered abandoning your AOS. Hope this helps.
Dhundhun
07-10 06:30 PM
On I-797 from Y it doesn't have I-94 number on it anywhere. since its through consular processing.
In order to work with Y, i have to get stamped first then only pay stubbs are generated. This was the understanding, when owner of Y ,company Y Attorney and myself were in the conference call discussion.
Basically the H-1B with company Y required Change of Status (COS). I am not familiar with this type of situation - whether you can get change of status done in USA or not. If not I think this is a case, which requires Visa to be stamped in home country.
Could somebody throw more infromation on this? Thanks
In order to work with Y, i have to get stamped first then only pay stubbs are generated. This was the understanding, when owner of Y ,company Y Attorney and myself were in the conference call discussion.
Basically the H-1B with company Y required Change of Status (COS). I am not familiar with this type of situation - whether you can get change of status done in USA or not. If not I think this is a case, which requires Visa to be stamped in home country.
Could somebody throw more infromation on this? Thanks
apb
09-11 02:47 PM
I also know one more with PD dec/03 and waiting