Geert
Jul 23, 07:43 AM
yesterday while browsing the forums I got kicked out.
Arn, am I a registered user?
'cause during MW forums were only for registered users and I could not get on.
Arn, am I a registered user?
'cause during MW forums were only for registered users and I could not get on.
twoodcc
Oct 22, 08:50 AM
I'll post it elsewhere when I get home. I have seen a number of very similar problems that seem to stem from bad wu's so I'll keep trying. It would be my luck though to have the first wu be bad making me think my set up isn't right.
yeah. let us know if you get it to work. hopefully your setup isn't bad.
yeah. let us know if you get it to work. hopefully your setup isn't bad.
mvc
Aug 16, 06:32 AM
Sorry, with that many tentacles I think it would have to be a Microsoft product. ;)
goldenlotus
Jan 14, 07:16 AM
I just feel like if you can hold off without peeking... it's like watching the State of the Union Address. Come on guys you can do it!
more...
Blind Buzzard
Dec 6, 07:54 AM
Have you installed the most current Firefox 1.5?
eye
Sep 14, 06:58 PM
I don't know what the big thing is, but the lump just looks like a snail.
more...
fongyuen
Mar 24, 11:19 PM
The second example is really significantly front-focused, and is shot at f/2.8, so I don't think your focus and recompose technique is to blame (I'd expect a lot less change in focus using the slight focus and recompose you've used here).
Did you lock focus on the eyes and then recompose? Is it possible that you re-focused after you recomposed?
yeah, i can try to take notice of this next time, but i don't think i'm moving that significantly forwards and backwards or laterally, esp. as you pointed out, the recompose distance isn't all that much. nonetheless, i'll try to be more careful next time.
i had a similar problem with my nikon 50mm, inconsistent focus and hunting for focus, even after i locked it. Problem was, I thought i locked it, but i didn't check the settings on the camera iteself. I was set up for continuous focus instead of single focus, which accounted for the lens hunting and refocusing everytime i tried to compose a shot.
not sure if this helps, but once i did realize my error of not resetting the camera for what i was trying to do, the problem was gone.
i'm definitely on One Shot AF rather than AI Servo so that shouldn't be it, but i haven't not tried locking the focus. i'll give that a try, thanks!
Did you lock focus on the eyes and then recompose? Is it possible that you re-focused after you recomposed?
yeah, i can try to take notice of this next time, but i don't think i'm moving that significantly forwards and backwards or laterally, esp. as you pointed out, the recompose distance isn't all that much. nonetheless, i'll try to be more careful next time.
i had a similar problem with my nikon 50mm, inconsistent focus and hunting for focus, even after i locked it. Problem was, I thought i locked it, but i didn't check the settings on the camera iteself. I was set up for continuous focus instead of single focus, which accounted for the lens hunting and refocusing everytime i tried to compose a shot.
not sure if this helps, but once i did realize my error of not resetting the camera for what i was trying to do, the problem was gone.
i'm definitely on One Shot AF rather than AI Servo so that shouldn't be it, but i haven't not tried locking the focus. i'll give that a try, thanks!
Zen0Jin
May 6, 12:11 PM
I put on order for the i7 and the 2Gig Video Card, would this machine handle somewhat serious gaming within 2 years time frame,
The 6970 card is 2 years old, since it can handle current games fairly decently, it will definitely not in 4 years (it would make it a 4 year old card).
The 6970 card is 2 years old, since it can handle current games fairly decently, it will definitely not in 4 years (it would make it a 4 year old card).
more...
cualexander
Jun 18, 10:03 AM
The southpark mall in Charlotte NC opens at 6am and only one door opens at that time. So I am getting there around 5:30am. Maybe I'll get lucky and no one will show up that early :)
vvebster
Oct 26, 12:58 AM
Movie Collection
more...
iHerzeleid
Jul 3, 03:16 PM
Apple replaced the MBP with a new 2.4Ghz MacBook Pro.
Thanks for your interest though. :)
Thanks for your interest though. :)
anfield11
Apr 8, 04:08 PM
Absolutely. If you're on AT&T's $25.00/month plan it will cost you and extra $20 in the months when you do that. AT&T has told me that if you've got one of the old $30/month unlimited data plans you can use the iPhone as a hotspot with no additional charge.
Thanks, I have a 6Gb data plan for $30/mth and my supplier [Rogers in Canada] wants $10 per month to let the iPad share it. I'm assuming if I go the wifi only iPad and use the Hotspot I won't pay any more....I think :)
Thanks, I have a 6Gb data plan for $30/mth and my supplier [Rogers in Canada] wants $10 per month to let the iPad share it. I'm assuming if I go the wifi only iPad and use the Hotspot I won't pay any more....I think :)
more...
AmigoMac
Nov 11, 05:47 AM
why has nobody ever replied to this???
I almost remember reading this before but that day I was preparing a birthday party for my son... anyway, welcome to the mac jungle 18th.
I almost remember reading this before but that day I was preparing a birthday party for my son... anyway, welcome to the mac jungle 18th.
vniow
Sep 21, 12:54 AM
Maybe since the 1.25 ghz are shipping now?
more...
JollyJoeJoe
Apr 23, 10:59 PM
So Im a freelance Editor/Motion Graphics guy with no real understanding of RAID Controller Cards, or how they work.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
3 drives in RAID0 ? Yikes, anyone of them goes and your machine is out of action. RAID0 offers no fault tolerance as no drives in the array share parity info or are mirrored.
You would most certainly see a benefit in a hardware RAID solution, especially if you are going to switch to a RAID level with some redundancy, like RAID5 or RAID10. Also a true hardware RAID takes the processing load off your processors and memory.
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
or Just RAID5 with 3x HDD's and partition the RAID volume.
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
I would go with a 6G controller so as to take advantage of new fast 6G SSD's etc.
nanofrog is the RAID-whizz around here and I am sure he would be able to suggest something for you.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
3 drives in RAID0 ? Yikes, anyone of them goes and your machine is out of action. RAID0 offers no fault tolerance as no drives in the array share parity info or are mirrored.
You would most certainly see a benefit in a hardware RAID solution, especially if you are going to switch to a RAID level with some redundancy, like RAID5 or RAID10. Also a true hardware RAID takes the processing load off your processors and memory.
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
or Just RAID5 with 3x HDD's and partition the RAID volume.
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
I would go with a 6G controller so as to take advantage of new fast 6G SSD's etc.
nanofrog is the RAID-whizz around here and I am sure he would be able to suggest something for you.
TheOnlyJon
Sep 14, 09:22 PM
Looks like a Dragonfly Larva (http://clean-water.uwex.edu/pubs/clipart/images/CRITTER/large/DragonflyLarva.jpg) to me. :)
more...
MacRumorUser
Mar 16, 01:08 PM
You need to start your own rental service and recoup some of those gaming funds; you'll probably turn a profit in a week's time with all the games you've been getting lately mate. ;)
I would do, But nobody would rent some of the crap I buy :D :(
I would do, But nobody would rent some of the crap I buy :D :(
Paradoxeon
May 1, 03:22 PM
Ok, I've checked the iPhoto version (version 9.0). So I decided, whatever, I'll update. However, my DOCK started to flash in and out (like when I killall Dock in Terminal) but automatically. It flashes every single second! I know it's the iLife apps because I uninstalled all of them in CleanMyMac app and did a reboot, and no dock flashing. But then, when I did a clean reinstall of my iLife '11, bam. Dock flashes. Right now I'm trying to ignore it, and am running Software Update - downloading updates right now. Here's my log in Console if it helps.
5/1/11 4:17:47.022 PM ReportCrash: Saved crash report for Dock[2307] version 1.8 (990) to /Users/Mac/Library/Logs/DiagnosticReports/Dock_2011-05-01-161747_My-iMac.crash
5/1/11 4:17:47.027 PM ReportCrash: Removing excessive log: /Users/Mac/Library/Logs/DiagnosticReports/Dock_2011-05-01-161333_My-iMac.crash
5/1/11 4:17:47.087 PM fseventsd: read_disk_log: error processing log file /.fseventsd/000000000022f938 (total_read 0, size 42)
5/1/11 4:17:49.686 PM mdworker: (Error) ImportPluginLoading: Couldn't load plugin '/Library/Spotlight/LogicPro.mdimporter/'
5/1/11 4:17:54.051 PM ReportCrash: Saved crash report for Dock[2309] version 1.8 (990) to /Users/Mac/Library/Logs/DiagnosticReports/Dock_2011-05-01-161754_My-iMac.crash
5/1/11 4:17:54.055 PM ReportCrash: Removing excessive log: /Users/Mac/Library/Logs/DiagnosticReports/Dock_2011-05-01-161340_My-iMac.crash
5/1/11 4:17:54.067 PM fseventsd: read_disk_log: error processing log file /.fseventsd/000000000022f938 (total_read 0, size 42)
5/1/11 4:17:47.022 PM ReportCrash: Saved crash report for Dock[2307] version 1.8 (990) to /Users/Mac/Library/Logs/DiagnosticReports/Dock_2011-05-01-161747_My-iMac.crash
5/1/11 4:17:47.027 PM ReportCrash: Removing excessive log: /Users/Mac/Library/Logs/DiagnosticReports/Dock_2011-05-01-161333_My-iMac.crash
5/1/11 4:17:47.087 PM fseventsd: read_disk_log: error processing log file /.fseventsd/000000000022f938 (total_read 0, size 42)
5/1/11 4:17:49.686 PM mdworker: (Error) ImportPluginLoading: Couldn't load plugin '/Library/Spotlight/LogicPro.mdimporter/'
5/1/11 4:17:54.051 PM ReportCrash: Saved crash report for Dock[2309] version 1.8 (990) to /Users/Mac/Library/Logs/DiagnosticReports/Dock_2011-05-01-161754_My-iMac.crash
5/1/11 4:17:54.055 PM ReportCrash: Removing excessive log: /Users/Mac/Library/Logs/DiagnosticReports/Dock_2011-05-01-161340_My-iMac.crash
5/1/11 4:17:54.067 PM fseventsd: read_disk_log: error processing log file /.fseventsd/000000000022f938 (total_read 0, size 42)
iStudentUK
Feb 15, 02:59 PM
I'll try and make this logical-
Is there a quick way to include what the person I am quoting quoted when I quote them?
In other words, if somebody quotes me and I want to reply, when I press quote it only includes what they wrote, not what I originally wrote as well. On busy threads it can would be useful to be able to quote everything.
Thanks, hope that made sense!
Is there a quick way to include what the person I am quoting quoted when I quote them?
In other words, if somebody quotes me and I want to reply, when I press quote it only includes what they wrote, not what I originally wrote as well. On busy threads it can would be useful to be able to quote everything.
Thanks, hope that made sense!
mnkeybsness
Jul 11, 06:49 PM
this worked for me at the screen saver password prompt. another issue that apple really needs to address.
tersono
Apr 25, 09:09 AM
Gusto
ivel
Dec 17, 10:22 AM
PM sent.
Karr271
Mar 11, 01:27 PM
Just got in line. Apple is handing out tickets for iPads in a few minutes. Up to two tickets per person. One iPad per ticket. About. Less than 40 in line. As of 2:30
Hellhammer
Apr 23, 11:07 AM
Don't buy AppleCare on eBay unless you can get the box.
Even that is not good anymore since Apple may ask for proof of purchase and a receipt from eBay auction is not accepted. Amazon is a good place if you are looking for cheap, yet legit AC.
Even that is not good anymore since Apple may ask for proof of purchase and a receipt from eBay auction is not accepted. Amazon is a good place if you are looking for cheap, yet legit AC.